“Light Shaping Filters” From Elation Instantly Give Any LED Fixture A Wider Beam Angle

Jun 1, 2010 With new LSF Series Light Shaping Filters from Elation Professional you can smooth out or widen the beam angle of any LED fixture. Elation Light Shaping Filters attach to a gel frame or the inside of an LED's casing in minutes-- to add 10°, 20°, 30° or a linear beam shape effect to its beam angle.

Elation Light Shaping Filters provide up to 92% light transmission, while standard diffusion filters typically transmit only 60% of the light. Elation Light Shaping Filters are available in four different beam angles: 10° LSF10-24), 20° (LSF20-22), 30° (LSF30-24) and 60°x1° (LSF601-24). With the first three versions, the beam angle is widened both vertically and horizontally - say 10° in both directions. The 60°x1° version broadens the angle 60° horizontally and only 1° vertically, making it great for long, flat wall washes. As an example, Elation put a 60°x1° filter on two LED par cans, spread them out approximately 4' on center and covered a 10' area of wall with the two fixtures, creating an ideal setup for up-lighting applications.

Light Shaping Filters can be used with LED fixtures made by any manufacturer, not just those from Elation. The filters come in large sheets, allowing users to cut them in the sizes needed. Each sheet measures 24”x 24” (except the 20° version which is 24”x 22”). If outfitting a 6” LED par can, for example, 16 filters could be cut from a 24”x 24” sheet.

Each Elation Light Shaping Filter sheet carries an MSRP of $139.99

www.elationlighting.com


Author:  BIO T&T